TrimTab System
Boat Specs:
- Overall Length: 19’8”
- Beam Length: 7’6”
- Draft: 12”
- Deadrise: 16 degrees (at transom)
- Engine: Honda
- Type: 4 cylinder, 4 stroke outboard
- Horsepower: 130
The Installer:
Francisco Isabel
Tampa , Florida
Installation Notes:
“The M120 Sport Tabs worked especially well on this Sea Craft MA 20. This boat has a transducer, a speed sensor, a swim platform, and a raw water livewell pump mounted on the transom. Because of this, wider trim tabs would be more difficult to mount. The 10″ x 12″ size is compact enough to easily fit this transom, but gives enough lift for this boat due to the unique Batwing design.
The installation of the tabs was fairly easy thanks to all the documentation provided in the package (manuals and video) and your website. Never during the installation did I have to backtrack from a step because of wrong or confusing instructions.”
Why Bennett?:
”I purchased Bennett Trim Tabs after recommendations from fellow Sea Craft owners who label the product as excellent and rate Bennett Marine support as outstanding.”
Sea Trial Results:
”My Sea Craft 20 now performs like a boat 23 feet long. Bennett Trim Tabs really have made a good ride an excellent one, plus I have noticed quicker response and acceleration out of the hole and being able to cruise at lower rpm.”