TrimTab System
Boat Specs:
- Overall Length: 15’0”
- Beam Length: 5’10”
- Draft: 6”
- Deadrise: 12 degrees
- Weight (Dry w/ No Motor): 380 lbs
- Engine: Mercury
- Type: 2 Stroke Outboard
- Horsepower: 40
The Installer:
Steve Parnell
New Smyrna Beach, Florida
Installation Notes:
“The size of the M80s makes them perfect for a narrow beam skiff such as this Mitzi. The 8″ span allows them to fit where a standard 12″ span tab may not. The short actuators (11 3/4″ long) allow for easy actuator placement on short transoms and do not interfere with the poling platform legs. The Hydraulic Power Unit on this boat was mounted in the starboard side rear storage compartment. The Waterproof Rocker Switch Control was mounted in the bottom right corner of the center console, making trim tab adjustments convenient when steering or throttle changes are made.”
Sea Trial Results:
“The boat runs perfect. The hole shot is unbelievable, and I have gained a good 4-5 mph on the top end. I would highly recommend these tabs to any small skiff owner.”