You are using an older version of the Internet Explorer web browser. For the best experience, please click here to get the latest version.If you continue to experience any issues, please contact headquarters at 954-427-1400.
x

Premier Series, Trim Tabs for the big boys

PremierTrimTabSystemsProductThumb_500pxBennett Premier Line Trim Tabs. Never has form following function looked so good.

Designed from the ground up as robust Trim Tab systems for yachts, sportfishing boats, commercial, government and military vessels Bennett’s Premier Line Trim Tabs cover vessels from 30-120 feet.

Utilizing all stainless steel construction eliminates the corrosion issues caused by mixing dissimilar metals in a saltwater environment. The Premier Line incorporates over 50 years of Trim Tab experience and features several Bennett innovations.

Powerful hydraulic actuators have no exposed lines and are totally protected inside the boat. Two compact, dual acting hydraulic power units, each producing about 2,400 pounds (1,100 kg) of force needed to trim large, fast vessels in rough sea conditions.

Laser-cut 7-gauge (4.7 mm) stainless steel, heavy duty trims planes can be custom fabricated to fit the transom configurations of a wide range of vessels.

All of the systems include the three-in-one Electronic Indicator Control (EIC5000) — combining highly accurate indication, precise control and convenient auto tab retraction. Like the hydraulic lines, the sensor wires for the indicator are not exposed at the transom, protecting them from the harsh marine environment.

SeaHunter_300x200

The XPT System is designed for high-performance boats from 30 feet (9 m) to 45 feet (14 m). 

Installation is streamlined by full height backing plates with preassembled actuators, while five different attachment points for the actuator on the Trim Plane easily accommodate various transom angles.

All XPT Trim Planes and Mounting Plates are electro polished, not only does this look sharp, it also passivates the welds to further increase corrosion resistance.

BXTBoat

The BXT System is designed for vessels from 40 feet (12 m) to 70 feet (21 m). 

BXT systems typically use Bennett’s exclusive interlocking hinge system for outstanding strength and corrosion resistance.

SSTBoat_300x200

The SST System is designed for vessels from 50 feet (16m) to 120 feet (38m).(Photo)

The SST series has gained a strong following among luxury yacht builders such as Fairline (others?). The larger actuators and hinges easily handle the larger Trim Planes required on vessels up to 120 feet.

Interested in equipping your vessel with the ultimate Trim Tabs?

Simply fill out the following forms to let us know the details of your vessel and the required custom cable lengths for your installation. And we will be delighted to develop a system and quote for you.

Step One: Fill out the Premier Line Specification Worksheet

Step Two: Choose and fill out one of following two forms: Single Station Wire Lengths, or Dual Station Wire Lengths

Step 3: Save a copy of the forms to your computer and then email the forms to us at info@BennettTrimTabs.com.

Need more information? 

Contact one of our friendly and knowledgeable customer service representatives, at +1(954)427-1400 or info@BennettTrimTabs.com.

Share this Post!

About the Author : Tom McGow

6 Comments
  1. Ian Patchell June 25, 2015 at 5:11 am - Reply

    I require assistance with parts for my 22 meter vessel fitted with Bennett trim tabs please

    • Tom McGow June 25, 2015 at 11:26 am - Reply

      Ian,

      Are you in New Zealand? If so, contact Lighthouse Marine Equipment in Auckland. http://www.lhmarine.co.nz/ Phone: +64 9 448 2761

  2. RENOVBOAT COMPANY April 12, 2016 at 11:33 am - Reply

    Hello Dear supplyer
    We are marine boat repair company in caribbean
    We need a complet , single station BXT system tabs , for 42 feet RAFAËLI , actually equipped with LENCO system we need to replace by a serious system.

    Let me know asap

    Best regards

    Marc Eugene

    • Tom McGow April 12, 2016 at 12:57 pm - Reply

      Please contact the factory directly at 954-427-1400.

  3. Chris Tyquin September 4, 2016 at 9:51 am - Reply

    Who in Australiacan I speak to re your BXT system for my motorboat ?

    • Tom McGow September 4, 2016 at 11:55 am - Reply

      JPW Marine Wholesale
      64 Division Street
      Welshpool,Western Australia 6106
      Australia

      or

      Harrold Marine
      Unit 3/19 Success St.
      Acacia Ridge
      Brisbane,QLD 4110
      Australia

Leave a Comment

Your email address will not be published.

Related post

+1-954-427-2700